Mouse Test

Check every mouse button, see how long each press lasts, and spot unexpected clicks.

Live test area
Click or scroll here to startTry each button with the pointer inside this area.
Mouse button results
ButtonPressesLast hold
Left button, not detected0—
Right button, not detected0—
Middle button, not detected0—
Back button, not detected0—
Forward button, not detected0—
Scroll events 0 up 0 down
Waiting for a button press

Press each button slowly to check for possible double-click chatter.

double click test
Runs locally · No uploads or signupHow we test

Last updated

How to use the mouse tester

Put the pointer on the mouse diagram and start with a button that normally works. Press it once and release. The matching part of the diagram lights up while it is down. The Presses column increments as soon as the page receives the press, and Last hold shows the time from press to release. You can watch the row say Held if you keep the button down for a moment.

  1. Press the left and right buttons once each. The test area blocks the normal right-click menu so it does not cover the results.
  2. Push the wheel straight down for the middle button. Keep the wheel still if you want an isolated middle-click result.
  3. Try both thumb buttons if the mouse has them. The browser identifies the usual assignments as Back and Forward. You can test the two side buttons in any order.
  4. Roll the wheel upward and downward a few small steps while keeping the pointer over the diagram. Check both direction indicators.
  5. If something looks wrong, reset the test and repeat just that action. Use slow, deliberate presses and watch for an extra count, a missed press, or a release that registers before your finger lifts.

Use an external mouse for the most informative result. On a phone or laptop with touch input, a tap or gesture can produce a compatibility click or another kind of input. It does not exercise the switch you would press on a mouse. The display works at narrow widths so you can read it on a phone or use it with an external mouse when the platform exposes the relevant events.

How to read your result

A counted press means the browser saw the button signal. A zero means that signal has not arrived during the session. It is expected for controls your mouse does not have. For a button you did press, check that the pointer was inside the diagram and that the mouse is sending the expected assignment. Some devices have a DPI-cycle or profile button that changes settings internally. Those controls may never appear as webpage input.

Last hold is a single duration, so a new press replaces the old reading. Compare a few short taps with a deliberate one-second hold. If the row returns from Held before you let go, or a sustained drag in another app drops unexpectedly, repeat the hold with a slight change in finger pressure. A repeatable early release can explain a dragging problem even when every press increments the count. A long movement out of the browser or a focus change can interrupt capture, so keep the tab active during the pass.

The verdict checks for rapid same-button presses. A gap at or below 80 milliseconds can flag Possible double-click chatter. That cutoff is a starting point for slow single-click testing. Fast intentional clicks, two fingers on one button, or a mapped action can meet it too. When the verdict says no rapid repeat was seen, it describes the session so far. Test after the mouse warms up or under the conditions that usually cause the symptom if the problem is intermittent.

Wheel counters show upward and downward browser events. One physical notch can supply several events, and a touchpad or free-spin wheel can keep sending events while slowing down. Start with a single small turn each way. If the expected direction never registers, first check whether a continuous scroll works in a normal document. If every movement is consistently reversed, look at the operating system’s scroll direction before blaming the wheel.

Why one press can show up twice

A mechanical microswitch opens and closes a contact. The device filters brief electrical transitions in firmware through a process called debouncing. Wear or contamination can make the signal unstable enough that a single physical action produces a second press in the operating system. You may notice files opening when you meant to select them, checkboxes returning to their previous state, or items dropping during a drag.

Vendor utilities can produce a similar pattern when a profile maps one switch to a double click or repeated action. An OS double-click speed setting changes how two clicks are grouped, which can explain why ordinary clicks open things in one program. Test one isolated button while using a standard profile, then compare with another mouse on the same computer. If the extra presses follow only one device, that is more informative than whether a single application happens to open a file.

Troubleshoot by symptom

A button does nothing. Try a normal action for that button in a second program. Confirm the mouse is awake and, for a wireless device, has enough charge. Reconnect the receiver or cable and try another USB port. If only one button is absent while the others register, check its assignment. If every button disappears together, investigate the connection before opening the mouse.

The wheel scrolls but will not click. Rolling the wheel and pressing it down actuate different parts. Slightly shift where your finger presses so you are pushing straight down. If the scroll counters move and the middle button never registers, check whether the wheel press was mapped to a shortcut or a scrolling mode. On some mice, a separate wheel mode switch changes the roll feel and generates no middle-click event.

The wheel jumps the wrong way. Slowly roll one or two notches in one direction, then pause. Watch for movement in the other direction while your hand stays steady. Repeat in a plain document without smooth-scrolling extensions. A reproducible reversal during slow movement can point to the wheel encoder. Scrolling that continues in the same direction after your hand stops may come from the device’s free-spin mode or operating-system momentum.

Only one game or program has the issue. Check the program’s mouse bindings and the active per-app profile. Some games ignore buttons assigned as keyboard or media controls. Test with the default profile and try another application that uses the same button. The polling rate checker can help with uneven cursor motion, and the DPI analyzer can help when distance or sensitivity feels wrong.

Side buttons, remapping, and browser differences

Labels in the tester refer to the browser’s button assignments. The front thumb button might send Back on one profile and Forward on another. Logitech G Hub, Razer Synapse, system accessibility features, and other mapping tools may replace the usual signal. Change only one mapping at a time and retest. Check any onboard profile after closing the utility, since closing a window may leave the device’s saved settings active.

The test pad blocks context menus and common browser navigation from mouse events that reach it. A system shortcut, browser-reserved gesture, remote desktop, or extension may consume a button earlier. Try the browser directly with its default mappings and keep the pointer inside the pad. On a Mac, a Magic Mouse swipe or a two-finger touchpad gesture may appear as a sequence of wheel events. Compare with a conventional mouse when diagnosing a switch or wheel problem.

Save a repeatable result for support

Reset first, reproduce one issue, then Save PNG or Copy result. The image records the URL, the time of the last input, the button totals and holds, and the verdict. In your support request, include the mouse model, operating system, browser, connection type, and the exact sequence you tried. If the issue follows the mouse to another computer, say which setup you used. A short video can help if a support team needs to see one physical press alongside two registered events.

Frequently asked questions

How do I know if my mouse buttons work?

Move the pointer into the purple test area and press each button once. Its count should increase by one and the last hold should appear after you release. Repeat any missing button with its default assignment enabled.

Can I test the middle button and side buttons?

Yes. Push the wheel straight down for middle click and try the two thumb buttons separately. The page expects standard Back and Forward mouse events. A keyboard shortcut or macro assigned to a thumb button may be invisible here.

Is this a mouse click speed test?

Use this mouse click test to confirm each press and release. It has no timed clicking challenge, and rapid intentional presses can trigger the chatter notice. For a switch check, slower clicks are more informative.

What click interval proves my mouse is faulty?

No interval proves a fault. A very short gap during a deliberately slow sequence is evidence worth repeating. Run another sample with default button mappings and compare with a known-good mouse before spending money on a repair.

Why does my scroll wheel sometimes go the wrong way?

If the direction reverses only for a moment during a straight, slow roll, the wheel encoder may be dirty or worn. A consistent reversal in every app usually points to a system direction preference instead.

Why did my thumb button navigate away?

The test pad cancels browser actions for button events it receives. Some devices send a navigation shortcut at the operating-system level instead. Try the default mouse-button assignments in the vendor utility and keep the pointer inside the test pad.

Can I test a wireless mouse or a laptop touchpad?

A wireless mouse works when the computer delivers standard mouse events. A touchpad may produce a click or scroll, but its gestures and momentum make it a poor comparison for physical switches and wheel detents.

Does this work on a phone or tablet?

You can read the guide and use a supported external mouse. A finger tap cannot exercise mouse switches, and mobile platforms can intercept secondary and side buttons before they reach the page.

Is my test data uploaded or stored?

Test input stays in the current tab and is cleared by reloading or resetting. You choose whether to copy a result or download a PNG. No account is required.